New woodworking products feed updated daily from Rockler.com

Total news: 240
Last news: August 26, 2010 11:50:09

Heavy-duty performance meets out-of-the-way convenience. With a 650 CFM suction capacity and a 3/4 HP, 60 Hz, 110 Volt, 12 amp motor, this compact dust collector handles serious shop messes without cluttering up your workspace. It mounts in seconds with a simple Z-bracket. Plus, its portable! Just set up a few Z-brackets around your shop or house to create dust-collection stations wherever you’re working. A comfortable foam-gripped handle makes transportation and setup a breeze. And at only 50 lbs., it’s not unwieldy. The motor features a sealed shaft and bearings for quiet, long lasting operation. The inlet accepts 4" hose.

A 15 gallon, 30-micron bag is included. The 5-micron replacement bag offers the same size and capacity as the Wall Mount Dust Collector’s original 30-micron bag, with much finer particle retention. Both bags are made from heavy-duty cloth and attach easily.

Includes one Z-bracket and mounting hardware. Additional Z-brackets sold separately.

Click here to download revised instructions.

For a limited time, get a Free Irwin Marathon 10 x 40T General Purpose Blade with purchase of this Blade Cleaning Kit! ($31.99 Value!)

With clean, cool-running cutters, you’ll get more precise cuts, a longer cutter life and spend far less on sharpening costs. Jumbo sized blade bath features a raised inner ring, which prevents the blade from suctioning to the bottom. 14" inside diameter accepts a 12" blade with plenty of room at the edges for easy removal. Includes blade bath with lid, 1 quart of Pitch and Resin Remover (makes 1 gallon), brass-bristled scrub brush and a 6 oz. plastic jar with lid for cleaning router bits.

Heres a versatile rule to keep on hand for layout jobs. With a center-finding rule along one edge and a standard 16" rule along the other, it breezes effortlessly from measuring to marking to drafting. The clear acrylic material makes lining up the graduations with the layout lines fast and accurate, and its ideal for finding centers in drawer fronts when locating pulls and knobs. Nearly 1/4" thick, its rigidity and the tapered edges yield straight, true lines. The 0 marks are set in from the ends for maximum accuracy when lining up the ruler, and the first inch is graduated in 1/32" and the rest in 1/16" for ease of reading.

A classic spindle design that gives you a choice between flat top or arch top headboards, and between long spindles running the height of the crib or short spindles with a solid panel for privacy. Crib spring height is adjustable to four levels. Plan includes scaled down templates for the curved pieces, cut lists and full instructions. Crib Hardware Kits (sold separately) are available in four different finishes, and include all necessary hardware. Crib has fixed sides.

New Items on the Shark Pro Plus

• Enhanced controller with more power that allows up to 200 inches per min
• Increased travel on the machine with a max cutting capacity of 25 x 25 x 5 inches
• Automatic on and off software control of Router
• Professional Aluminum case with Push button Estop.
• Pendant control capability included. (Designed for numeric laptop keypad)
• Cut 3D software included ($300 Value!)
• 20 3D models, font and graphic package provided
• Extended Aluminum T slot top (28-1/2 x 36) for more versatile clamping
• Precision lead Screws with anti backlash on all axis

Includes V-Carve 5.5 software, 1/2 dia. V-groove and 1/8 Roundnose Router Bit and two hold-down clamps!

Bring the speed and precision of computer-controlled machinery to your shop with this top value CNC system! With a table measuring 28-1/2 x 36 it’s ideally suited for carvings and machining operations on a large variety of signs, doors and other small projects. It boasts impressive power, speed, accuracy, and ease of use. With its robust steel and high-density poly-ethylene construction, it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine.

It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit and a 1/8 Roundnose Router Bit. The CNC Shark also includes the new version 5.5 of the VCarve Pro software interface — a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB cable to the controller box and the other end to your computer (not compatible with Mac computers).

Visit a store near you for a live Demo!

Introducing CNCSharkTalk.com, a new website presented by Rockler where CNC Shark and CNC Shark Pro users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark projects. Now online - visit today!

All the great features of the original Bench Cookie™ Work Grippers (26357) in a sleek black finish to blend with home decor. These discs are perfect for a multitude of applications, including steadying cutting boards, picture frames and glass, laptop computers and more. Stack between audio/video equipment components to create space for heat to escape and to add stability. Or get creative and think up your own new applications! Discs are easy to set up, adjust and store. 3" diameter x 1" thick. Not intended for use in hot applications. Set of four. Patent pending.

Accurately measure angles from 15° to 170° to ensure proper layout for cuts, corners, joints and more. Protractor is anchored to pivoting 20" and 9" ruler arms, and the angle indicator moves along the protractor as ruler arms are opened and closed. Ruler arms feature standard measurement accurate to 1/16" and metric measurement accurate to 1mm.

Hurry! Only 1 available!
Ships from Oregon at no additional cost.

Powermatic PJ-882HH 8 Parallelogram Jointer with Helical Cutterhead

• Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
• Extra long 82" table for expanded work support
• Parallelogram design helps maintain table parallelism and eases table raising and lowering
• Rack and pinion handwheel for precise fence tilting (Patented)
• 1/8" depth of cut limiter for fast table positioning
• High-mount switch for operator convenience
• No-mar fence insert protects table

If its heirloom quality, it should see more than a few years of use. Our convertible design does just that. With three beds in one: a crib, a youth bed, and a full-sized bed, its built to follow your child from infancy, through toddlerhood and into adulthood. And with classic design and sturdy joinery, it will easily stand the test of time. The plan takes you through the entire process, and even includes a couple of clever jigs that make machining the slats and tenons a breeze. The Transitional Hardware Kit is available separately, and includes all necessary hardware for the conversions. Crib has fixed sides. Crib Hardware Kit (available in 4 different finishes) sold separately.

All metal, adjustable 3-leg stand for the DW788 20"scroll-saw.

• Accessory kit for Leigh D4R dovetail jig includes the vacuum and router support (VRS)
• 1/4", 5/16", 3/8, 7/16", 11/16", 13/16" x 8 degree dovetail bits
• 7/16" x 1-1/4" CL straight, 1/2 x 1-1/4" CL straight bits
• 1/2" x 10 degree, 12 degree, and 18 degree dovetail bits
• 1/2" and 8mm shank bits, 1/2" to 8mm collet reducer

Leigh D4 accessory kit includes the (VRS) vacuum and router support and 12 piece bit set. Leighs ingenious VRS provides router support and dust-free routing. The 12-piece bit set features 1/2" and 8mm shank bits. The set includes: 1/4" x 8 degree dovetail, 5/16" x 8 degree dovetail, 3/8, 7/16" x 8 degree dovetail, 11/16" x 8 degree dovetail, 13/16" x 8 degree dovetail, 7/16" x 1-1/4" CL straight, 1/2 x 1-1/4" CL straight, 1/2" x 10 degree dovetail, 1/2" x 12 degree dovetail, 1/2" x 18 degree dovetail and a 1/2" to 8mm collet reducer.

The Fein HEPA Filter Bag Kit works with Fein I, II and II Turbo Vacs and includes: HEPA Filter, dust bag, flange and mounting screw.

A magnetic catch for free swinging wood doors. Super strong magnet in walnut brown plastic casing. 1-7/8" x 1/2". Brown plastic housing has slotted hole for adjustment. Double magnet plates. Magnet has approximately 3 - 5 lb. pull. Supplied with one 5/8 x #4 Flat Head Screw.

Keep close tabs on the position of your router lift with this clever remote gauge. Accommodates vertical or horizontal setup. Positional measurements from 0 to 6" read out on a large LCD display in standard, metric and fractional inch modes. Display is connected to the gauge by a 4 wire and features a platform and two rare earth magnets for mounting on your table surface. Includes vertical, horizontal and slider mounting hardware.

Offer valid while supplies last! Quantities are very limited!

• Flute Length: 1 3/8"
• Fillet Height: 11/64"
• Large Radius: 5/16"
• Small Radius: 11/16"
• Shank Diameters: 1/2
• Overall Length: 3 17/64

Offer valid while supplies last! Quantities are very limited!

• Traditional Chair Rail
• Flute Length: 1 1/2
• Fillet: 5/32
• Large Radius: 3/4
• Small Radius: 5/32
• Shank Diameters: 1/2
• Overall Length: 3 11/16

Offer valid while supplies last! Quantities are very limited!

• Beading stile profile for rail and stile doors
• For use with Porter-Cable 43551 rail bit
• Chip limiting design for more control and safer cutting
• 1/2" shank
• Carbide-tipped for long lasting sharpness and durability.

Offer valid while supplies last! Quantities are very limited!

• V-Groove
• Cut Capacity - Width: 3/4
• Flute Length: 17/32
• Angle: 90
• Shank Diameters: 1/2
• Overall Length: 2 1/8

Offer valid while supplies last! Quantities are very limited!

• Carbide-tipped
• Corner radius: 5/32"
• Diameter: 1-5/8"
• Cutting length: 5/8" min., 31/32" max.
• Flute length: 29/64"
• Overall length: 3-3/32"
• Shank: 1/2"
• Shank length: 1-1/2"

Offer valid while supplies last! Quantities are very limited!

• Cove & Bead
• Diameter: 1 1/2
• Flute Length: 13/16
• Shank Diameters: 1/4
• Overall Length: 2 17/32